3 Configuring virtual machines Note: 1. Be careful with USB devices that are currently in use on the host! For example, if you allow your guest to connect to your USB hard disk that is currently mounted on the host, when the guest is activated, it will be disconnected from the host without a proper shutdown. This may cause data loss. 2. Solaris hosts have a few known limitations regarding USB support please see chapter 14, Known limitations, page 181. In addition to allowing a guest access to your local USB devices, VirtualBox even allows your guests to connect to remote USB devices by use of the VirtualBox Remote Desktop Extension (VRDE). For details about this, see chapter 7.1.4, Remote USB, page 93. In the Settings dialog, you can first configure whether USB is available in the guest at all, and in addition also optionally enable the USB 2.0 (EHCI) controller for the guest. If so, you can determine in detail which devices are available. For this, you must create so-called “filters” by specifying certain properties of the USB device. Note: The EHCI controller is shipped as a VirtualBox extension package, which must be installed separately. See chapter 1.5, Installing VirtualBox and extension packs, page 14 for more information. Clicking on the “+“ button to the right of the “USB Device Filters” window creates a new filter. You can give the filter a name (for referencing it later) and specify the filter criteria. The more criteria you specify, the more precisely devices will be selected. For instance, if you specify only a vendor ID of 046d, all devices produced by Logitech will be available to the guest. If you fill in all fields, on the other hand, the filter will only apply to a particular device model from a particular vendor, and not even to other devices of the same type with a different revision and serial number. In detail, the following criteria are available: 1. Vendor and product ID. With USB, each vendor of USB products carries an identification number that is unique world-wide, the “vendor ID”. Similarly, each line of products is assigned a “product ID” number. Both numbers are commonly written in hexadecimal (that is, they are composed of the numbers 0-9 and the letters A-F), and a colon separates the vendor from the product ID. For example, 046d:c016 stands for Logitech as a vendor, and the “M-UV69a Optical Wheel Mouse” product. Alternatively, you can also specify “Manufacturer” and “Product” by name. To list all the USB devices that are connected to your host machine with their respective vendor and product IDs, you can use the following command (see chapter 8, VBoxManage, page 99): VBoxManage list usbhost On Windows, you can also see all USB devices that are attached to your system in the Device Manager. On Linux, you can use the lsusb command. 2. Serial number. While vendor and product ID are already quite specific to identify USB devices, if you have two identical devices of the same brand and product line, you will also need their serial numbers to filter them out correctly. 3. Remote. This setting specifies whether the device will be local only, or remote only (over VRDP), or either. 50